QCTLG-125HA/LG-200HA Pro Automated Machine Use Plasma Cutting Machine

This plasma cutting machine is specially work with CNC machinery and robot cutting, the machine is small volume, light weight which is easy to install on the machinery;
Good HF arc strike technology, the arc strike controller is separate from the power source, which reduces the HF interruption to the CNC control system;
The gas control is separate with the power source: with shorter gas circuit, more stable gas pressure and cutting quality;
High duty cycle designing which is suitable for heavy industry use;
Cutting current up slope technology to reduce the wearing parts consumption;
Accurate cutting current preset, step-less control;
With gas pressure checking and indication function;
With gas checking function which is easy to adjust the gas pressure;
With overload, lack voltage, over voltage and lack phase protection;
125HA with constant arc strike function, which suitable for plate cutting, LG-200HA Pro with automatic torch cooling system inside;

Parameters

Item	Unit	Model
		LG-65MA	LG-125MA	LG-200MA
		Input Power	V/Hz	3 ～ 380 ± 15% 50/60
Rated Input Capacity	kVA	10	24.1	55.3
Rated Input Current	A	15.3	36.7	83.2
Rated Output Current / Voltage	A/V	65/106	125/130	200/200
Rated Opend Circuit Voltage	V	300	320	360
Rated Duty Cycle	-	60% (40 ^oC)	100% (40 ^oC)	100% (40 ^oC)
Efficiency	-	87%	90%	92%
Power Factor	-	0.79	0.74	0.8
Rated Output Current Adjust Range	A	30 ～ 65	30 ～ 125	40 ～ 200
Arc Voltage Output Signal Ratio	-	1 : 1
Arc Strike Mode	-	Non-contact
Plasma Gas	-	Air	Air	Air / N ₂ / O ₂
Shielding Air	-	-	-	Air / N ₂
Air Pressure	Mpa	0.3 ～ 0.6	0.4 ～ 0.6	0.4 ～ 0.6
Quality Cut Thickness (Carbon Steel)	mm	12 (850mm / min)	25 (580mm / min)	32 (500mm / min)
Insulation Grade	-	F
Power Source Cooling Mode	-	Air Cooling
Ingress Protection	-	IP21S
Dimension (LxWxH)	mm	585 x 280 x 485	670 x 320 x 600	850 x 410 x 880
Arc Ignition Controller Net Weight	Kg	2.5	4.5	9.3
Power Source Net Weight	Kg	24	53	106